Industrial video           

3 CCD colour cameras

Reference technical notes
Introduction to CCD cameras

•  Sentech cameras  •  Hitachi cameras  •  Sony cameras  •  Pulnix cameras  •  JVC cameras  •  TVI cameras  •

•  B/W industr.video  •  B/W progress.scan  •  Colour  • 3 CCD colour •  Colour progr.scan Sony  •

All cameras are supplied without lens, unless otherwise indicated

NTSC standard cameras available on request

DXC-C33P
1/3" 3 CCD colour imager with Exwave Had technology. High performance 3 CCD remote head camera with IEEE 1394 interface. Ultra small sized and lightweight 3 CCD camera head. User-friendly camera controlo unit (CCU). 10 bit DSP signal processor with extended features. Residual Pixel Noise (RPN) compensation. C mount. IEEE 1394 digital output, DV PAL format. Compatible with DSR seies digital recorders. 2 frame memory. Foot switch capability. Automatically adjust contrast corresponding to the brightness signal level of the entire image (DynaLatitude™). Clear images can be captured even if both bright and dark areas exist within an image. Gen-lock capability (VBS, Hd/Vd). Strobe function, hyper gain, WEN, Hd/Vd output, RGB sync. Medical safety standard  EN-60601-1. Remote control unit connecting capability. RS-232C interface. Horizontal resolution: 850 TV lines. S/N ratio: 62 dB (PAL).
Pick-up device	1/3" interline transfer CCD
Effective pixels	752(H) x 582(V)
Sensing area	4.8(H) x 3.6(V)mm
Scanning system	PAL 2:1 interlaced ,  625 lines (NTSC on request)
Horizontal frequency	15625 kHz
Vertical frequency	50 Hz
Sync system	internal/external (VBS or Hd/Vd)
Phase control	H/SC
Horizontal resolution	850 TV lines
Lens mount	C mount
Sensitivity	f8.0 at 2000 lux (3200°K)
Minimum illumination	4 lux (F2, gain:Hyper)
S/N ratio	61 dB (typical)
Gain	STEP/AGC/HYPER selectable STEP: 0 to 24 dB by 1 dB step AGC: 0 to 24 dB (limit value: 6dB, 12 dB, 18 dB, 24 dB selectable)
Electronic shutter	8.0 to 1/100.000 sec
Lens	manual iris
Automatic exposure area	multi/large/medium/spot/slit selectable
Automatic exposure level	variable
Automatic exposure speed	fast/medium/slow selectable
Automatic exposure detect	average/peak selectable
Contrast effect	manual/DynaLatitude/DCC+ selectable
Knee point	high/ normal/low selectable contrast effect: manual
Black stretch	variable (contrast effect : manual)
Gamma	ON/OFF (variable at ON)
Pedestal	master and R/B manual adjustable
Black balance	ABB
White balance	AWB/ATW normal/ATW wide/manual/3200 °K/5600°K selectable  AWB oR ATW paint manual R/B gain
ATW area	normal/manual selectable
ATW speed	fast/normal/slow selectable
Detail level	all/target/off (variable at all or target)
Detail frequency	high/medium/low selectable
Linear matrix	all/target/off
Linear matrix mode	standard/R enhance/G enhance/B enhance/manual
Partial enhance	All/In/Out selectable
CCD integration mode	Field/Frame selectable
Shading compensation	Off/On (manual control)
Trigger polarity	positive edge trigger/negative edge trigger selectable
Baud rate	19200/9600/4800/2400/1200 selectable
Sync	RGB/G/Off selectable
Strobe	slave
User file	A/B switchable (two pattern memories)
Scene file	standard/microscope/full auto/strobe/file A or B
Output signal	I.LINK: IEEE 1394 based VBS: 1.0 Vp-p 75 Ω sync negative RGB: 0.7Vp-p, 75Ω, sync switchable sync: 2 Vp-p 75Ω Y: 1.0 Vp-p 75Ω C: PAL 0.3 Vp-p 75Ω, without sync
Operating temperature	-5 to +45°C
Storage temperature	-20 to + 60°C
Power supply	100 to 240Vac, 50/60 Hz
Power consumption	18W max
Dimensions (W x H x D)	head: 32 x 38 x 40 mm dimensional drawing CCU: 200 x 88 x 242mm
Weight	head: 48g CCU: 2.5 kg
Control unit	CCU front panel
Connectors	DV Out:  6 pin jack RGB/SYNC; 9 pin D-sub Video Out:  BNC S-Video: 4 pin mini DIN FS/TRIG In: stereo mini jack Remote: 8 pin mini jack AC inlet Camera 20 pin
Pin configuration	pin configuration
Rear panel	remote head and CCU rear panel

DXC-390P
1/3" 3 CCD colour imager with Exwave Had technology. C mount. Strobe trigger function: realises full vertical resolution of fast moving objects. Full control of functions accessible from the side panel or through the optional RM-C590 remote control unit. Colour shading compensation and flange back adjustment. Automatically adjust contrast corresponding to the brightness signal level of the entire image (DynaLatitude™). Clear images can be captured even if both bright and dark areas exist within an image. Wide selection of Automatic Exposure (AE) modes: user defined light metering area, selectable AE speed, wide range. Hyper gain(+30 dB). Extended genlock (VBS genlock and Hd/Vd): allows syncronization with frame grabber boards. Scene files and user files: enables the user to set two custom parameters in the menu for constant recall. RS-232C interface. S/N ratio: 61 dB.
Pick-up device	1/3" interline transfer CCD
Effective pixels	752(H) x 582(V)
Sensing area	4.8(H) x 3.6(V)mm
Scanning system	PAL 2:1 interlaced ,  625 lines (NTSC on request)
Horizontal frequency	15625 kHz
Vertical frequency	50 Hz
Sync system	internal/external (VBS or Hd/Vd)
Phase control	H/SC
Horizontal resolution	800 TV lines
Lens mount	C mount
Sensitivity	f8.0 at 2000 lux
Minimum illumination	4 lux (F2, gain:Hyper)
S/N ratio	61 dB (typical)
Gain	STEP/AGC/HYPER selectable
Electronic shutter	OFF/STEP/Variable/CCD Iris selectable
Lens	Remote (Auto or Manual)/ Video selectable
Automatic exposure area	multi/large/medium/spot/slit/manual selectable
Automatic exposure level	variable
Automatic exposure speed	fast/medium/slow selectable
Automatic exposure detect	average/peak selectable
Contrast effect	manual/DynaLatitude/DCC+ selectable
Knee point	high/ normal/low selectable contrast effect: manual
Black stretch	variable (contrast effect : manual)
Gamma	ON/OFF (variable at ON)
Pedestal	master and R/B Manual adjustable
Black balance	ABB
White balance	AWB/ATW normal/ATW wide/manual/3200 °K/5600°K selectable  AWB oR ATW paint manual R/B gain
ATW area	normal/manual selectable
ATW speed	fast/normal/slow selectable
Detail level	On/Off (variable at On)
Detail frequency	high/medium/low selectable
Linear matrix	On/Off
Linear matrix mode	standard/R enhance/G enhance/B enhance/manual
Partial enhance	All/In/Out selectable
CCD integration mode	Field/Frame selectable
Shading compensation	Off/On (manual control)
Trigger polarity	positive edge trigger/negative edge trigger selectable
Baud rate	19200/9600/4800/2400/1200 selectable
Sync	RGB/G/Off selectable
Strobe	On/Off
User file	A/B switchable (two pattern memories)
Scene file	standard/microscope/full auto/strobe/file A or B
Output signal	VBS/ RGB/Y/C
Operating temperature	-5 to +45°C
Storage temperature	-20 to + 60°C
Power supply	10.5 to 15Vdc
Power consumption	approx 7.5W
Dimensions (W x H x D)	56 x 50 x 128 mm (excluding projecting parts) dimensional drawing
Weight	approx 370g
Connectors	Lens:  6 pin RGB/SYNC; 9 pin D-sub DC IN/VBS: 12 pin Video Out:  BNC Trigger In: BNC Remote: 8 pin mini DIN
Pin configuration	pin configuration
Supplied accessories	lens cap , tripod adapter, operation manual, panel sheet for RM-C390
Optional accessories	lens , remote control unit, camera adapter, microscope adapter, microscope coupler, camera cable
Rear panel

DXC-990P
1/2" 3-CCD colour imager with Exwave Had technology. Superior picture quality. Bayonet mount. 10 bit DSP signal processor with extended features. Automatically adjust contrast corresponding to the brightness signal level of the entire image (DynaLatitude™). Clear images can be captured even if both bright and dark areas exist within an image. Residual Pixel Noise (RPN) compensation. Scene File and User File. Colour shading compensation. Wide selection of Automatic Exposure (AE) modes: user defined light metering area, selectable AE speed, wide range. Abundant electronic shutter function. Versatile white balance. Genlock capability (VBS, Hd/Vd). Strobe function, hyper gain, WEN, Hd/Vd output, RGB sync. Flicker canceller. RS-232C interface. Medical approval EN-60601-1. On screen menu. Horizontal resolution: 850 TV lines. S/N ratio: 62 dB.
Pick-up device	1/2" Exwave Had interline transfer CCD
Effective pixels	752(H) x 582(V)
Sensing area	6.4(H) x 4.8(V)mm
Scanning system	PAL 2:1 interlaced ,  625 lines (NTSC on request)
Horizontal frequency	15625 kHz
Vertical frequency	50 Hz
Sync system	internal/external (VBS or Hd/Vd)
Horizontal resolution	850 TV lines
Sensitivity	f11 at 2000 lux
Minimum illumination	1 lux (F1.4, gain:Hyper)
S/N ratio	62 dB
Gain	STEP/AGC (0-24 dB)/HYPER selectable
Shutter speed	0.5 - 1/100.000 sec
Lens mount	bayonet mount
Automatic exposure area	multi/large/medium/spot/slit/manual selectable
Automatic exposure level	variable
Automatic exposure speed	fast/medium/slow selectable
Automatic exposure detect	average/peak selectable
Contrast effect	manual/DynaLatitude/DCC+ selectable
Knee point	high/ normal/low selectable
Black stretch	variable
Gamma	ON/OFF
Pedestal	master and R/B Manual adjustable
Black balance	ABB
White balance	AWB/ATW normal/ATW wide/manual/3200 °K/5600°K selectable  AWB oR ATW paint manual R/B gain
ATW area	normal/manual selectable
ATW speed	fast/normal/slow selectable
Detail level	On/Off (variable at On)
Detail frequency	high/medium/low selectable
Linear matrix	On/Off
Linear matrix mode	standard/R enhance/G enhance/B enhance/manual
Partial enhance	All/In/Out selectable
CCD integration mode	Field/Frame selectable
Shading compensation	Off/On (manual control)
Trigger polarity	positive edge trigger/negative edge trigger selectable
Baud rate	19200/9600/4800/2400/1200 selectable
Sync	RGB/G/Off selectable
Trigger	On/Off
User file	A/B switchable
Scene file	standard/microscope/full auto/strobe/file A or B
Output signal	VBS,  RGB/SYNC, Y/C, Y/R-Y/B-Y
Serial data	RS-232C
Operating temperature	-5 to +45°C
Storage temperature	-20 to + 60°C
Power supply	10.5 to 15Vdc
Power consumption	approx 7.5W
Dimensions (W x H x D)	70 x 72 x 123.5 mm dimensional drawing
Weight	630g
Connectors	RGB/SYNC; 9 pin D-sub DC IN/VBS: 12 pin Video Out:  BNC Trigger In: BNC Remote: 8 pin mini DIN Genlock In: BNC Lens:  6 pin
Pin configuration	pin configuration
Supplied accessories	lens cap , stopper mount, operation manual, panel sheet for RM-C390
Optional accessories	lens , lens mount adapter,  remote control unit, camera adapter, microscope adapter, microscope coupler, camera cable
Rear panel	rear panel drawing

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.

Click on words highlighted in yellow to view links.



Cliccate sulle immagini miniaturizzate per vederle ingrandite.

Click on thumbnails to view enlarged images.

© Rapitron s.r.l.  -  1998-2006

Via Washington 59  -  20146 Milano ITALIA      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153



Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.

I marchi citati sono di proprietà dei rispettivi proprietari.

Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso .

Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.

All trademarks are property of the respective owners.

All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.

This Web Site is hosted by Range s.a.s. - Genova